BS EN 10213-4-1996 Technical delivery conditions for steel castings for pressure purposes. Austenit
|
ID： |
42EB18D619B34B0BAF5CBCEFB8F827E8 |
|
文件大小(MB)： |
0.16 |
|
页数： |
12 |
|
文件格式： |
|
|
日期： |
2010-8-10 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
BRITISH STANDARD BS EN,10213-4:1996,Technical delivery,conditions for steel,castings for pressure,purposes —,Part 4: Austenitic and,austenitic-ferritic steel grades,The European Standard EN 10213-4:1995 has the status of a,British Standard,ICS 11.140.30,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:59:19 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10213-4:1996,This British Standard, having,been prepared under the,direction of the Engineering,Sector Board, was published,under the authority of the,Standards Board and comes,into effect on,15 May 1996,. BSI 12-1998,The following BSI references,relate to the work on this,standard:,Committee reference ISE/6,Draft for comment 93/301842 DC,ISBN 0 580 25543 3,Committees responsible for this,British Standard,The preparation of this British Standard was entrusted to Technical,Committee ISE/6, Steel castings, upon which the following bodies were,represented:,BEAMA Ltd.,British Pump Manufacturers’ Association,British Valve and Actuator Manufacturers’ Association,Castings Technology International,Engineering Equipment and Materials Users’ Association,Hopkinsons Limited,Institute of British Foundrymen,Institution of Mechanical Engineers,Lloyd’s Register of Shipping,Ministry of Defence,Railway Industry Association,Amendments issued since publication,Amd. No. Date Comments,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:59:19 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10213-4:1996,. BSI 12-1998 i,Contents,Page,Committees responsible Inside front cover,National foreword ii,Foreword 2,Text of EN 10213-4 3,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:59:19 BST 2006, Uncontrolled Copy, (c) BSI,BS EN 10213-4:1996,ii . BSI 12-1998,National foreword,This British Standard has been prepared under the direction of Technical,Committee ISE/6, Steel castings, and is the English language version of,EN 10213-4 Technical delivery conditions for steel castings for pressure,purposes — Part 4: Austenitic and austenitic-ferritic steel grades published by the,European Committee for Standardization (CEN).,The following Parts of BS EN 10213 supersede BS 1504:1976 which is now,withdrawn:,A British Standard does not purport to include all the necessary provisions of a,contract. Users of British Standards are responsible for their correct application.,Compliance with a British Standard does not of itself confer immunity,from legal obligations.,BS EN 10213-1 Technical delivery conditions for steel castings for pressure,purposes,Part 1:1996 General,BS EN 10213-2 Technical delivery conditions for steel castings for pressure,purposes,Part 2:1996 Steel grades for use at room temperature and,elevated temperatures,BS EN 10213-3 Technical delivery conditions for steel castings for pressure,purposes,Part 3:1996 Steels for use at low temperatures,BS EN 10213-4 Technical delivery conditions for steel castings for pressure,purposes,Part 4:1996 Austenitic and austenitic-ferritic steel grades,Summary of pages,This document comprises a front cover, an inside front cover, pages i and ii,the EN title page, pages 2 to 6 and a back cover.,This standard has been updated (see copyright date) and may have had,amendments incorporated. This will be indicated in the amendment table on,the inside front cover.,Licensed Copy: Institute Of Technology Tallaght, Institute of Technology, Tue Aug 29 10:59:19 BST 2006, Uncontrolled Copy, (c) BSI,EUROPEAN STANDARD,NORME EUROPéENNE,EUROP腎SCHE NORM,EN 10213-4,December 1995,ICS 77.140.10,Descriptors: Cast steels, structural steels, boilers, pressure equipment, delivery, designation, grades: quality, chemical composition,mechanical properties, austenitic steels, ferritic steels,English version,Technical delivery conditions for steel castings for,pressure purposes — Part 4: Austenitic and,austenitic-ferritic steel grades,Conditions techniques de livraison des pièces,moulées en acier pour service sous pression —,Partie 4: Nuances d’aciers austénitiques et,austéno-ferritiques,Technische Lieferbedingungen für Stahlgu?für,Druckbeh鋖ter — Teil 4: Austenitische und,austenitisch-ferritische Stahlsorten,This European Standard was approved by CEN on 1995-10-20. CEN members,are bound to comply with the CEN/CENELEC Internal Regulations which,stipulate the conditions for giving this European Standard the status of a,national standard without any alteration.,Up-to-date lists and bibliographical references concerning such national,standards may be obtained on application to the Central Secretariat or to any,CEN member.,This European Standard exists……
……